Send mail to us

welldrillingrig@126.com

Truck mounted water well drilling rig

Home / Products / Truck mounted water well drilling rig / BZCY600BZY truck mounted drilling rig
  • BZCY600BZY truck mounted drilling rig

BZCY600BZY truck mounted drilling rig

Description:BZCY600BZY truck mounted drilling rig

Ordering hotline:+86 543 3325896

Send mail to us:welldrillingrig@126.com

Make an inquiry

Main features

◎BZCY600BZY truck mounted drilling rig is a directly rotary drilling rig. This truck chassis is adopt the 8×4 special chassis of brand SINOTRUK, 11.00R20 steel off-road tire tread, with good off-road performance.

◎This rig has very compact structure, the engine of chassis is adopted SINOTRUK diesel engine, the power is 196kw(strong power) ,the emission standards is Euro IV. The drilling rig has independent diesel engine (Cummins), the power is 132kw. Not only meet the drilling requirements, but also reduce energy consumption, it is very affordable.

◎This rig is design principle is an advanced hydraulic cylinder for drilling, stepless lift, it can be achieved automaic drilling. it can automatically adjust the drilling speed for different geological conditions.

◎The drilling process can be achieved in pressruized drilling technology, adjust different pressure for different geological conditions, and can be viewed drilling pressure by pressure gauge. At the same time, it can adjust the drilling speed.

◎The drilling rig can achieved fast drilling by manually, especially for soil. It can achieved different speed for different soil.

◎It has a large lifting force hydraulic main hoist, stepless lift, and to achieve release rope quickly. When upgrading heavy, the lifting speed need slow to aviod crash the turntable and wellhead board. When put down single drill pipe, operate the quick handle, it can achieved release rope quickly like mechanical hoist.

◎It has a hydraulic tool hoist, the tool hoist has large lifting force and quick lifting speed, it is both easy to loading drill tools, drill pipe and drill accessories transport, and can slide up and down with anchors, its very convenient to load and unload the drill pipe.

◎It has a hydraulic cylinder control double card board forward and backward, it makes the insurance card board closed, to achieve stuck or release the pipe joints.

◎It use integrated design of pneumatic, to achieve the 3NB-130 mud pump clutch using pneumatic remote control, it has high degree of automation and easy-saving operation.

◎It is installed 4 hydraulic legs and 2 mechanical legs, every hydraulic leg rod with locknut。After leveling the rig, it can lock the cylinder use locknut. So, even if the cylinder leaks, the chassis is not instability.

◎The turntable use stir bars, internal turntable use spiral arc gear to transmission, it has large torque, it about 2 times of similar products at domestic and foreign.

◎It is installed a generator (30kw) , so that it is convenient to illuminate or work at night.

◎The hydraulic system use open system, the chassis and drilling rig are separately manipulated, it can avoid misuse. Winter oil heater and summer oil radiator are installed, to adapt to different seasons hydraulic oil for heating and cooling.

◎This drilling rig equipped with an auxiliary unloading cylinder, it can be used to promote the turntable ratchet, to achieve auxiliary unloading the drill pipe.


Technical parameter

Drilling depth(M(

600

Drilling diameter(mm)

500

Inner diameter of the rotary table(mm)

500

Speed of turntable(r/min)

117;102;60;38;23;13;16(reverse)

Torque of turntable(KN.m)

5.4---34(reverse)

Single rope lifting capacity of main windlass(KN)

50

The capacity of main windlass(KN)

300

Single rope lifting capacity of tool windlass(KN)

20

The rope capacity of tool windlass(m)

40

The lifting capacity of hook(KN)

320

Bearing capacity of mast (KN)

360

The effective height of mast (mm)

11800

The height of mast (mm)

12468

Bearing capacity (t)

36

Pipe

Kelly (mm)

108×108×7500

Assistant pipe (mm)

Ф89×10×6000


Hydraulic pump

Model

CBQL-F550/F532-CFHL

Pump delivery (ml/r)

50/32

Rated speed (r/min)

2000

Rated pressure(MPa)

20


3NB-130

plunger pump


Diameter of cylinder (mm)

100 110 120 130 140

Stroke of piston (mm)

160

Theory of flow (L / min)

1000

Rated pressure (Mpa)

5

Pounding times (min-1)

135

Diameter of suction tube (mm)

152

Diameter of drain pipe (mm)

65

Input speed (r / min)

565

Input power (kw)

95

Overall dimensions (mm)

2160*1400*1300

Weight (t)

3.9

Truck chassis

Model

TAZ5204TYT

Drive form

8×4

Engine

Model

SINOTRUK D10.27-40diesel engine

Rated power(KW)

196

Speed (r/min)

2200

Size (L*W*H)(mm)

11510×2480×2800

Drilling rig engine

Type

CUMMINS 6BTA5.9-C180 diesel engine

Power(kw)

132

Speed(r/min)

2200

Electric generator

Model

MF

Rated power (kw)

30

Rated voltage(v)

380

Rated current(A)

27

Speed (r/min)

1480

Frequency(Hz)

50

Protection level

IP21

Insulation Class

H

The best working gear (or speed)

5th gear(1000-1400r/min)

The highest speed(Km/h)

70

Weight (kg)

21650

Transport size(L*W*H)(mm)

12720×2490×4210

Working size(L*W*H)(mm)

11830×5370×14010